The phrase “laminate countertop” usually elicits a look of distaste. A wrinkled nose, maybe a brief sigh and then the phrase, “Too bad it’s not real stone.” For people in their mid-30s to 50s, it brings back memories of speckled off-white or squiggly “Saved by the Bell”-style counters from childhood homes. Even people who wouldn’t describe themselves as design-savvy see laminate, like wallpaper at a certain point, as outdated. But that could be changing.
Homeowners, designers and even celebrities are warming to the idea of laminate surfaces thanks to new technology that mimics the look and feel of real stone and wood. The pendulum started swinging back toward less-expensive surfaces around 2005, when birch plywood, reclaimed wood and concrete started being used in a more modern way.
Designers realized that if they kept the lines clean and added quality accessories, they could use inexpensive materials to create a chic space, says Los Angeles interior designer Amy Sklar. (She estimates that laminate can be about a quarter of the price of stone.) “Now you’re also getting more exposure to design through social media, so trends cycle quickly. Cheaper surfaces like laminate become a not terribly expensive way to do something bold and exciting, but it’s not the end of the world to replace.”
The term “laminate” covers a variety of materials (even plywood is considered a laminate), but generally it’s a decorative veneer that must be applied to a material such as plywood or particle board, called a substrate. A “high-pressure decorative laminate” is used for countertops. Westinghouse first made it into a sheet material around the start of the 20th century and was awarded the patent, but its inventor, Daniel O’Conor, saw more potential in laminate sheeting and left Westinghouse to co-found Formica. Companies started using the material on tabletop sewing machines because it’s slippery, letting fabric move over it quickly. It started appearing in tabletops in the ‘20s and bars in the ‘30s, but it didn’t really hit the consumer market until after World War II when there was a push because of the housing boom.
To ‘50s home buyers, laminate was considered a luxury material. But a growing sensitivity to synthetic materials in the ‘70s started the aversion to laminate that still exists today. The dramatic patterns of its ‘80s resurgence — with linear, streaky textures from printing limitations — didn’t help its reputation, says Grace Jeffers, a New York City design historian and materials expert for laminate manufacturer Wilsonart.
But now, thanks to the cyclical nature of design, younger millennials are poised to become laminate’s ideal consumers — because they’re too young to remember the crazy patterns of the ‘80s. The stigma is gone.
A few years ago, after pinpointing millennials as a major demographic, Wilsonart started conducting trend research. It discovered that these buyers didn’t want retro-looking laminate; they wanted surfaces that mimicked natural surfaces that were too pricey.
“It’s interesting because they didn’t even really know what laminate was. It was a brand-new surface to them,” says Natalia Smith, a Temple, Texas, design manager for Wilsonart.
Newer laminate patterns benefit from advanced printing technology. Designers today are able to scan a piece of stone slab from different angles to create a large digital file. A printer can then lay it down four times, building layers with translucent inks that can mix colors to create a realistic final product, Smith says.
Today’s laminate looks like the real thing. Is that enough? There are disadvantages to using a material with a substrate. Elle H-Millard, industry relations manager at the National Kitchen & Bath Association, explains that although finishes have evolved to resist small scratches, an accidental gouge can chip the surface, revealing the material underneath. Depending on the quality of your laminate, heat can damage the surface as well, clouding the color or warping the finish. Some finishes can resist heat up to 400 degrees, but if heat resistance is a concern in your kitchen, another material might be a smarter choice.
Seams, which show up in stone countertops as well, are also more noticeable than with a solid surface, especially on the edges. There are still edges that show the transition of color between the surface and substrate.
“It’s like slicing a carrot versus slicing a radish. Stone is one color throughout, like a carrot. Laminate just has that top layer of color or pattern like a radish,” says Boston interior designer Taniya Nayak. “It limits your design options, too,” she adds. “You have to use drop-in sinks; you can’t do an undermount because the substrate will swell if it’s exposed to water.”
Resale value is another concern. Nayak has been using laminate countertops since the early 2000s, when she was on the HGTV show “Designed to Sell,” and recently installed them in a condo-apartment development. “For the rental units they didn’t want to put in as much money. So we did real stone in the condos, and in the rentals we used a gorgeous laminate that looks like concrete. Everyone that goes in there can’t tell that it’s not real concrete,” Nayak says.
Still, she explains, “laminate is an impostor version, and even if they look exactly the same, you know the difference.” And when it comes time to sell, buyers will find out. “I always advise going for the best you can afford and what you feel is right for your home. If you can swing it, get the stone. ... It’s the same thing as leather versus vinyl.”
Budget-conscious buyers may decide it’s worth it. The average cost of laminate countertops at national home improvement stores, such as Home Depot and Lowe’s, is $12 to $28 per square foot without installation, and an average of $26 to $38 per square foot with installation. A stone such as granite would be $36 to $98 per square foot for just the materials, jumping to $40 to $100 per square foot with installation. Laminate tends to be more DIY-friendly, too; it’s easier to cut and comes in prefabricated sections as long as 10 feet for under $200. With a life span of at least 20 years, if you care for it properly (avoiding heat or chipping) laminate lasts as well. It’s a wipe-clean surface that doesn’t require special cleaners or maintenance.
Home improvement gurus Erin and Ben Napier of Laurel, Miss., have used laminate on their popular HGTV show “Home Town” to help keep their renovations budget-friendly. The couple recently worked with a 23-year-old client to buy and renovate her starter home with a budget of $75,000. Installing Calacatta marble-lookalike countertops in the kitchen let them spend more on the rest of the design. “When you save money there, then you put more money toward beautiful appliances or a hood vent or a cool backsplash, which can elevate the entire space,” Erin Napier says.
For homeowners thinking of using laminate, most designers and manufacturers recommend going to a showroom to really look at all of your options. Then get samples to try out for a bit. Some finishes will be more forgiving than others, and some will show fingerprints more than others, Sklar says. “You want to touch it, you want to feel it, you want to put a cup of coffee down on it, you want to do all the things you would do to road-test any other material.”